Quality Control in an Indoor LED Light Manufacturer | Mihouse Lighting
  • PHILIPS
  • CREE
  • OSRAM
  • EDISON
  • TEIJIN

Branded Raw Materials for Quality LED Lights

At Mihouse, we always purchase branded LED chips, electronic components, aluminum, and plastic parts for every batch to produce the best quality LED lights.

Mihouse's premium indoor LED lights feature with high performance, energy efficiency, and a long lifetime.

Incoming Quality Control

Every material & component will go through strict incoming quality tests before production.

  • LED chip testing
    01 / 07

    LED Chip Testing

    We invest in Spectrum integrating spheres to test color temperature, luminous flux, luminous efficacy and color tolerance of LED chips, ensuring the quality and performance of chips are qualified.

  • Use a LCR meter to test inductance
    02/07

    Inductance Testing

    We invest in spectrum integrating spheres to test color temperature, luminous flux, luminous efficacy and color tolerance of LED chips, ensuring the quality of chips are qualified.

  • Use a dielectric strength tester to qualify the aluminum electrolytic capacitor
    03/07

    Aluminum Electrolytic Capacitor Testing

    We utilize a dielectric strength tester to qualify the capacitor's ability, making sure capacitors can be operated safely during rated electrical conditions.

  • Inspect plastic components with a electronic scale
    04/07

    Plastic Component Inspection

    We perform a visual inspection and heating test to ensure that the plastic parts are heat resistant, flame retardant, UV resistant, good insulation, and not easily broken.

  • Test ceramic capacitors with professional instruments
    05/07

    Ceramic Capacitor Testing

    We test ceramic capacitors by visual inspection and using professional instruments to guarantee the specification, weldability, durability, and fire resistance of capacitors.

  • Test SMD resistors with a LCR meter
    06/07

    SMD Resistor Testing

    Our inspectors mainly use a caliper and LCR meter to measure whether the specification, resistance value, and power rating of SMD resistors are within the specified limit.

  • Check hardware samples with a micrometer caliper
    07/07

    Hardware Detection

    In this step, we will check hardware samples for appearance, specification, and dimension to ensure the components is smooth and matched when assembling.

  • LED chip testing
  • Use a LCR meter to test inductance
  • Use a dielectric strength tester to qualify the aluminum electrolytic capacitor
  • Inspect plastic components with a electronic scale
  • Test ceramic capacitors with professional instruments
  • Test SMD resistors with a LCR meter
  • Check hardware samples with a micrometer caliper

Well-Designed Structure for High Performance

Our engineers are capable of optimizing the interior design of our LED lights to enhance the ability of heat dissipation, extend the service life, and guarantee the solid structure.

Mihouse's T5 LED series with a patented design contributes to enhancing the illuminance and fitting various structure styles.

An engineer is drawing designs on the computer

Quality Control During Production

Our inspectors will conduct professional testing in each production process to detect products and handle the quality issues in time.

  • A inspector is examining the welding condition of wire

    Welding Inspection

    We will strictly check the welding process to ensure the welded electronic components are solid, preventing components from deformation, short circuit, cracking, and falling off.

  • A inspector is conducting stress test

    High Voltage Test

    According to the industrial standards of GB7000.1-2002 & GB15143, we test housings and power inputs under 1600V high voltage to avoid the risk of electric leakage.

  • A inspector is conducting aging test and recording the results

    Assembly Inspection

    LED production involves the assembly of numerous parts. Our inspectors check the assembly every two hours to ensure the assembly of parts are solid and correct.

  • A inspector is inspecting the assembly and taking notes

    Aging Testing

    We conduct the aging testing for all finished LED lights to guarantee the long lifespan of LED lights and avoid discovering problems until the final packaging.

Outgoing Quality Control

We detect finished LED lights to ensure that you will always receive the most quality LED lights. Inspection items includes:

• Appearance & label inspection
• Materials' identification inspection
• Packaging inspection
• Spectrum test
• Dielectric strength test
• Electrical performance test

  • Product inspection
  • LED Chip Testing
  • Lamp temperature test
  • Lamp test
  • Product inspection

Get Quality Indoor LED Lights to Brighten Your Business.

Get a Quote